The Intel Internal modem requires a free PCI slot in your computer. After installing the modem, close the case and restart the computer.

The first time your computer starts after the internal modem is installed, you will need the setup CD-Rom that came from Qwest. It should be in the same package as modem.

1. Your computer will prompt you to install the drivers, which will be found on the CD. The CD does NOT contain drivers for Windows XP.
   Click here for Windows XP drivers from Qwest.
2. Once the drivers are found and installed, the setup process will begin. It will ask a series of questions. The answers can be found below
   • connection type: PPPoA
   • VPI , VCI: 0, 32 (older installations may require 1,1)
   • Username/Password: These must be coordinated with us
3. The ISP technical support phone number is entered next. Enter either the St. George number, 674-0165 or the Cedar City number, 865-0606. If you are outside either one of those areas, you can use 866-INFOWEST
4. IP addressing is dynamic on our system. (Static IP addresses can be assigned by request. An additional charge applies)
5. DNS servers need to be statically assigned.
   • Primary DNS server: 204.17.177.10
   • Secondary DNS server: 204.17.177.20
6. After the information has been entered, the setup process will perform 2 tests. The first test will test the integrity/functionality of the line. The second test will test the connection to InfoWest across the DSL line.
   Please Note: If the first test fails, the Qwest DSL line is not yet working properly. If the second test fails, please contact us.
7. The software installatin is now completed. Click finish, and now there should be a new icon on your desktop called "Qwest DSL services". To connect to DSL, double click that icon and press connect.

When using the Intel DSL modem, you must connect using the icon described above. Once connected, your computer will have received its IP address from our server. As mentioned in step # 5 above, the DNS servers must be specified.

Intel Internal DSL modems are not designed to be "shared" or integrated into an existing network. Although it is possible, we do not support "sharing" of the Intel internal DSL modems.

If you need further assistance, please e-mail us at support@infowest.com
or click here for additional contact information.